-
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one with the RGB baselit model having the newer 2-button 16 soundfont board! You can also opt for a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one with the RGB baselit model having the newer 2-button 16 soundfont board! You can also opt for a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one, available in a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one with the RGB baselit model having the newer 2-button 16 soundfont board! You can also opt for a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one with the RGB baselit model having the newer 2-button 16 soundfont board! You can also opt for a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one with the RGB baselit model having the newer 2-button 16 soundfont board! You can also opt for a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one with the RGB baselit model having the newer 2-button 16 soundfont board! You can also opt for a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one, available in a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
One of the models on which we allow custom backorders. If your desired install option does not show as 'in-stock', we can custom order with an ETA of approximately 4 weeks. Just place your order as normal and we'll ship it to you once it arrives. An awesome design this one, available in a SN Pixel or a Proffie V2.2 installation. This is a very cost-effective, interpretation of this particular model. A great buy for PT fans! -
Sale!
This purchase is for an N-Series electronics core, charging cable AND blade. Designs of cores vary between sabers and whilst we always strive to keep spare cores in stock, there are periods where they may be a couple of weeks away. PLEASE CONTACT US AND CHECK that your model core is in stock, before purchase. Options available:- RGB Baselit
- SN Pixel 4.0
- Proffie V2.2 Pixel
-
A superb dueling model. Not only does the red accent and aggressive lines threaten menace, the design is such that the tsuba offers moderate protection for the dominant hand. This design is all intimidation and threat. The lines are cut to make a statement and that statement is dominance. Available in either an RGB baselit or a SN-Pixel install option. This saber is sure to draw attention. -
Sale!
Please note. These are a little bit special. They are heavily discounted as we're winding down our custom shelf stock. These are hand installed, custom sabers made with absolutely top knotch components from our sister custom SaberSmith company over at Sulphur City Foundry. People have asked us to list them here in order to use AfterPay and we've obliged. https://sulphurcityfoundry.co.nz/product/kr-sabers-flagship-001-ready-to-ship-rts/ This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:- KR Sabers Flagship in Tactical Green
- Proffie V2.2 with approx' 12 quality open source sound fonts.
- ShtokCustomWorx NPXL V3 Hilt Side PCB Connector
- Correct grade silicon wire throughout
- KR Sabers Duoswitch. A PWR & AUX tactile switch combined into one 12mm 'rocker' design.
- 3D Printed Chassis
- High capacity 18650 cell (unprotected)
- KR Sabers 28mm Bass Speaker
-
Sale!
Please note. These are a little bit special. They are heavily discounted as we're winding down our custom shelf stock. These are hand installed, custom sabers made with absolutely top knotch components from our sister custom SaberSmith company over at Sulphur City Foundry. People have asked us to list them here in order to use AfterPay and we've obliged. https://sulphurcityfoundry.co.nz/product/sabertrio-vahlken-dolovite-grade-b-009-ready-to-ship-rts/ This is a brand new saber expertly installed with carefully selected, complimentary quality components. It is a grade B hilt which means it has small cosmetic flaws. On this hilt, flaws include minor dings on the back edge of the emitter. There may be other smaller cosmetic flaws. This is sold (kinda) un-rectified, but could be touched up with nail polish or paint / pen. I've demonstrated my favourite technique for dealing with powder coat dings, which is simply using a permanent marker dabbed into the chip to simulate carbon scoring. You get that mix of bare metal, black + the original finish. These small cosmetic niggles saves you some serious $$$. The red is difficult to capture, but it's a slightly deeper red than the images portray and is semi-translucent (see through). The images with the white background are more representative than the main image. Should note, that we consider powder coated hilts like this as 'show ponies', unless you're happy to live with the dings just to have a unique saber. Powder coat can chip under impact. It is lovingly installed in-house with factory components. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. You cannot get an RGB baselit Proffie V2.2 install from the factory. Hilt:- SaberTrio Vahlken Dolovite (grade B)
- Proffie V2.2 with approx' 8 quality, open source sound fonts.
- TCSS Copper based heatsink and high performance SaberTrio XP-E2 Tri Cree LED
- Correct grade wire throughout
- Single 16mm non-illuminated red switch. Saber runs single switch logic. Aux switch is a dummy.
- SaberTrio factory delrin chassis
- Chassis mounted kill switch
- High capacity 18650 cell (protected)
- SaberTrio 22mm Bass Speaker
-
An ideal saber for our younglings. A beautiful finish on this contemporary, shorter, easier to handle design. Contoured for grip and one of our lighter Youngling options. Has a gorgeous accent colour fade from the emitter to the switch. -
An ideal saber for our younglings. A beautiful finish on this contemporary, shorter, easier to handle design. Contoured for grip and one of our lighter Youngling options. Has a gorgeous accent colour fade from the emitter to the switch. -
An ideal saber for our younglings. A beautiful finish on this contemporary, shorter, easier to handle design. Contoured for grip and one of our lighter Youngling options. Has a gorgeous accent colour fade from the emitter to the switch. -
Currently only available in 32" (82cm) length, this is a 1" diameter PIXEL blade for a pixel installed saber. It has a parabolic tip secured into the blade by two retention lugs. Comes in a striking 'RAGE" overlay. This is a standard opaque blade, the colour of which is defined by your saber. -
With super convenient quick release capability, these couplers allow you to quickly switch between a staff and dual wield (2 sabers) configuration on the go. Just pull back the collar and the coupler will separate and vice versa. These staff couplers are vented for sound and feature threads compatible with (most of) our range of sabers. We sell these in Female - Female (FF) versions. Please ensure you select the correct thread configuration for your two sabers. NOTE, due to the inherent design, there's a little bit of play in the interface, so we think these better suited for cosplay and choreography. If you're wanting to duel, go for the standard, rigid coupler. THAT SAID.... this particular model has very tight tolerances and has a little less play than the black model. There's more of a 'knack' in the quick release operation (watch the video). It's a shade 'chunkier' than the black model. -
A gorgeous svelte design available in either an RGB baselit or a SN-Pixel install option. A mix of sleek, uncomplicated lines and a textured grip make this a great choice for an RGB baselit dueling model. The saber is installed with the newer model chassis with an internal recharge port so as not to impact the functional tone. Switch LED colours may vary. -
We're pleased to announce that we are now the exclusive New Zealand go-to guys for the absolutely beautiful AusSabers Armoury designs. The Apprentice V2 is an incredibly well designed hilt, balancing form and functionality. Despite the name, there's nothing 'apprentice' about it. A well designed grip and a popular angled emitter with perfectly placed shine-throughs. It's a substantial feeling, well balanced hilt. This is a great hilt. -
We're pleased to announce that we are now the exclusive New Zealand go-to guys for the absolutely beautiful AusSabers Armoury designs. The Guardian is a beautifully clinically designed hilt, balancing form and functionality. Being a shorter design, it makes for a perfect Shoto. A subtle control box balances form and function. Saber hilt is 245mm long. Grip diameter 37mm, thinner areas are around 33mm in diameter This is a great hilt.
Your Friendly New Zealand Lightsaber Stockist. Helping Grow the NZ Saber Community Since 2017 – Find Out More
POLICIES
STORE
CATEGORIES
COMMUNITY
CONTACT
© Copyright 2022 - 2025. Passionately designed by the Rotorua Web Design team at Go Robot Ltd. Ruthlessly effective Internet marketing.
The enthusiast products listed on this website are in no way affiliated, associated, licensed or endorsed by Disney or Lucasfilm Ltd., Industrial Light and Magic or any of their associates. All prices are in New Zealand Dollars (NZD). All prices include Goods Sales Tax (GST).
