-
These staff couplers are vented for sound and feature threads compatible with our range of sabers. We sell these in Male - Male (MM) and Female - Female (FF) versions. Please ensure you select the correct thread configuration for your two sabers. -
Out of stock
These staff couplers are vented for sound and feature threads compatible with our range of sabers. We sell these in Male - Male (MM) and Female - Female (FF) versions. Please ensure you select the correct thread configuration for your two sabers. -
Out of stock
These staff couplers are vented for sound and feature threads compatible with our range of sabers. We sell these in Male - Male (MM) and Female - Female (FF) versions. Please ensure you select the correct thread configuration for your two sabers. -
Quite a cool accessory! This is a 2 in 1 belt hanger featuring both a drop in covertech slot and a hook for D-rings. -
Quite a cool little gizmo that converts your pixel saber into a baselit. This means that you can fit a conventional hollow blade for the purposes of dueling. You'll note that we don't warranty Pixel sabers for dueling because it's the blades that will prematurely fail. This handy drop in module is a little game changer!! If you're a regular dueller, we'd always recommend going with a dedicated RGB Baselit model, but this will let you 'dabble' with dueling. The lesser current draw will also mean that your saber will run a lot longer. -
Available in either 37" or 32" length, this is a 1" diameter (hollow) blade for an RGB Baselit installed saber. It has a parabolic tip secured into the blade by a screw thread & adhesive. -
Quite a cool accessory! Inspired by a great SW game, combine this with one of our horizontal display stands for an absolutely epic lightsaber display. -
Out of stock
Available in either 37" or 32" length, this is a 1" diameter (hollow) blade for an RGB Baselit installed saber. It has a round tip secured into the blade by a screw thread & adhesive. -
Quite a cool accessory! Inspired by a great SW game, combine this with one of our horizontal display stands for an absolutely epic lightsaber display. -
Sale!
This is a Heavy Grade Pixel Blade 1″ (Round Tip) that was damaged in transit. It fires up & illuminates, but there is a small crack running from the peg that holds in the PCB module to the bottom of the tube. Even when fitted, we don't anticipate that there will be further cracking. As is. NO WARRANTY. -
Quite a cool accessory! This decorative scabbard is designed for 1" diameter 92cm blades (though you can use shorter.... you just won't get full illumination at the end). A mix of plastic, polycarbonate & aluminium, it looks great when illuminated. Goes without saying... saber is not included. -
Out of stock
This purchase is for an electronics core only. Designs of cores vary between sabers and whilst we always strive to keep spare cores in stock, there are periods where they may be a couple of weeks away. If you are changing from an RGB baselit core to a pixel option, you will also require a pixel blade. if you are changing from one pixel option to another, the same blade will work with both install options. If you are changing from a pixel option to an RGB base lit option, you will require an RGB baselit blade. PLEASE CONTACT US AND CHECK that your model core is in stock, before purchase. Options available:- RGB Baselit
- SN Pixel 4.0
- Proffie V2.2 Pixel
-
These are Xeno3 cores for the S-Series sabers. They are USB-C recharge port models (we can also source models with a 2.1mm recharge port. Just enquire as to availability). This purchase is for an electronics core + recharge cable only. This item does NOT include a blade. If you are migrating your saber from a baselit RGB model to a pixel model, you will need to purchase a pixel blade. If you are migrating your saber from one pixel core to another (Xeno3 to Proffie V2.2 for example) you can use the same pixel blade. PLEASE CONTACT US AND CHECK that your saber will fit, before purchase. Options available:- Xeno3RGB Baselit
- Xeno3Pixel
- Proffie V2.2 Pixel
-
Available in either 37" or 32" length, this is a 1" diameter (neo)pixel blade for a SN-Pixel or Proffie V2.2 Pixel installed saber. These blades have a parabolic shaped tip secured by two polycarbonate pins towards the tip of the blade. The base PCB is also secured by two polycarbonate pins. -
Available in either 37" or 32" length, this is a 1" diameter (neo)pixel blade for a pixel saber. These blades have a rounded tip secured into the blade by a screw thread & adhesive. The base PCB is secured by two polycarbonate pins. -
Sale!Out of stock
This purchase is for an N-Series electronics core, charging cable AND blade. Designs of cores vary between sabers and whilst we always strive to keep spare cores in stock, there are periods where they may be a couple of weeks away. PLEASE CONTACT US AND CHECK that your model core is in stock, before purchase. Options available:- RGB Baselit
- SN Pixel 4.0
- Proffie V2.2 Pixel
-
Sale!
This purchase is for an N-Series electronics core, charging cable AND blade. At the time of writing, all of our S-Series sabers use the same USB model cores. PLEASE CONTACT US AND CHECK that your saber will fit, before purchase. Options available:- Xeno3RGB Baselit
- Xeno3Pixel
- Proffie V2.2 Pixel
-
Sale!Out of stock
This a brand new grade A hilt with a used Xeno 3 RGB core (carrying a full 12 month warranty). The core was previously sold in a saber at which point the blue-tooth module failed not soon after shipping. No other functionality was affected so, the core works perfectly fine, but you can't use the app / blue-tooth. Warranty obviously doesn't cover the blue-tooth functionality. Saber comes with a mid-grade blade. No manual, but simply refer to the operation video (https://youtu.be/H4ipEDG9gJQ). May not ship in factory box. Save a tonne on this model!!! -
A popular, contemporary design available in either an RGB baselit or a SN-Pixel install option. The sleek, uncomplicated lines make this a great choice for an RGB baselit dueling model. The saber is installed with the newer model chassis with an internal recharge port so as not to impact the svelt lines. Switch LED colours may vary. -
Out of stock
A popular, contemporary design available in either an RGB baselit or a SN-Pixel install option. The sleek, uncomplicated lines make this a great choice for an RGB baselit dueling model. The saber is installed with the newer model chassis with an internal recharge port so as not to impact the svelt lines. Switch LED colours may vary.
Your Friendly New Zealand Lightsaber Stockist. Helping Grow the NZ Saber Community Since 2017 – Find Out More
POLICIES
STORE
CATEGORIES
COMMUNITY
CONTACT
© Copyright 2022 - 2024. Passionately designed by the Rotorua Web Design team at Go Robot Ltd. Ruthlessly effective Internet marketing.
The enthusiast products listed on this website are in no way affiliated, associated, licensed or endorsed by Disney or Lucasfilm Ltd., Industrial Light and Magic or any of their associates. All prices are in New Zealand Dollars (NZD). All prices include Goods Sales Tax (GST).
